The replacement screen is usually done with the provided tool. It doesn’t matter where to get iPhone screen fixed; these tools are vital for phone screen repair:
- Mini screwdriver
- Mini Torx screwdriver
- Plastic tweezer
- Plastic wedges
- Guitar picks
- Curved tweezers
- Precision knives
- Manual scalpel dryer
- Heat gun
These tools are included to remove the case and loosen all components that may interfere with screen repair. For example, there are Torx screws under the battery cover of a mobile phone. You need to remove them before carefully disassembling the case. Remember, you don’t have to spend any money on these tools. Grinding the ends of a pair of plastic bicycle wheel arms provides some useful options. Otherwise, you can purchase them at a relatively low price for cheap iPhone screen repair.
1- Remove (if possible) the back cover and battery, and determine where to hide the Torx screw (or standard screw). Look under the label and next to the USB port. If your device has removable components, you can find the screws in the battery compartment for iPhone glass replacement. Separate the phone with the lever and lock lever. You also need to loosen the other screws. Pay attention to the ribbon cable, which requires careful unlocking of the connector.
Now you should leave the front of the phone blank, and you can remove the screen to start the phone screen repair process. Use a heat gun, or you can put your phone in a warm place (such as a radiator) for a while. It is usually not difficult to convince the mobile phone screen to peel off the case. You can do it yourself or take it to an iPhone screen repair near me.
3- First, slide the camera’s opening toward the glass, and then slowly remove the glass screen from your body. As mentioned earlier, some spare parts are half of the phone. In this case, you do not need to remove the display, but you will have to remove the components (even the motherboard) from the damaged device in the new case.
4- Replace the glue Replace the narrow roll glue that can purchase online. Cut it into 1mm wide strips and apply glue to the phone frame instead of the glass. You can take it to places that fix iPhone screens for cheap and still get the best results.
5- Install a new monitor. After the glue is in place, remove the protective strip from the glue and reinsert the glass. Apply light pressure where the screen touches the adhesive. Be careful not to press the center of the screen glass. Excessive force may damage the hardest Gorilla Glass.
6- Make sure that the cable connection is secure. It’s time to put the phone back in place. Connect the appropriate cables and secure them if necessary. Carefully reinsert the components into the box and check for extra cables or screws for phone screen repair. Check your phone to make sure it is working properly. You should be able to turn on the phone.
Phone screen repair is one of the Phonebulance services. If you need this service, you can provide your contact information to connect with our team. Click here to book an appointment. And you can easily Check our reviews on Yelp.